- Pipe coupling
Style 60 (Type N-0)
A ring-type coupling designed for an operating pressure of 1.0 MPa.
A ring-type coupling. It features a pull-out prevention design in which a ring is welded to the pipe.
After installation, it provides a limited degree of flexibility. Installation is simple, as the joint can be completed by tightening just two bolts.
| Available Sizes | 50A–400A |
|---|---|
| Operating Pressure | Operating Pressure: 1.0 MPa (10 kgf/cm²) Test Pressure: 2.0 MPa (20 kgf/cm²) |
| Material | Housing: FCD450-10, etc. Bolts/Nuts: S25C, etc. Rubber: SBR, etc. |
| Coating | Housing: Phthalic resin coating Bolts/Nuts: Electro-galvanized *Other coating options are also available upon request.* |
| Applications |
Pipe end
Movement Capability
Maximum operating pressure
Pipe material
|
Dimension Table
Dimension Table
A ring-type coupling designed for an operating pressure of 1.0 MPa.
A ring-type coupling. It features a pull-out prevention design in which a ring is welded to the pipe.
After installation, it provides a limited degree of flexibility. Installation is simple, as the joint can be completed by tightening just two bolts.
| Available Sizes | 50A–400A |
|---|---|
| Operating Pressure | Operating Pressure: 1.0 MPa (10 kgf/cm²) Test Pressure: 2.0 MPa (20 kgf/cm²) |
| Material | Housing: FCD450-10, etc. Bolts/Nuts: S25C, etc. Rubber: SBR, etc. |
| Coating | Housing: Phthalic resin coating Bolts/Nuts: Electro-galvanized *Other coating options are also available upon request.* |
| Applications |
Pipe end
Movement Capability
Maximum operating pressure
Pipe material
|
