- Expansion joint & Flexible joint
Style 130 (Type VD)
A cast iron sleeve joint for plain-end pipes.
A simple cast iron expansion joint for plain-end pipes that allows direct insertion and connection of the pipe. It consists of one sleeve, two flanges, rubber rings, and several bolts and nuts.
Rubber rings are placed at both ends of the sleeve and secured by flanges tightened from the outside with long bolts.
| Available Sizes | 65A–300A |
|---|---|
| Operating Pressure | Operating Pressure: 1.0 MPa (10 kgf/cm²) Test Pressure: 2.0 MPa (20 kgf/cm²) |
| Material | Sleeve/Gland: FCD450 Bolts/Nuts: SS400, etc. Rubber: SBR, etc. |
| Coating | Internal/External Surfaces: Liquid epoxy resin coating for water supply Bolts/Nuts: Hot-dip galvanized *Other coating options are also available upon request.* |
| Applications |
Applications
Required performance
Pipe end
Operating pressure
|
Sectional View
Dimension Table
Sectional View
Dimension Table
A cast iron sleeve joint for plain-end pipes.
A simple cast iron expansion joint for plain-end pipes that allows direct insertion and connection of the pipe. It consists of one sleeve, two flanges, rubber rings, and several bolts and nuts.
Rubber rings are placed at both ends of the sleeve and secured by flanges tightened from the outside with long bolts.
| Available Sizes | 65A–300A |
|---|---|
| Operating Pressure | Operating Pressure: 1.0 MPa (10 kgf/cm²) Test Pressure: 2.0 MPa (20 kgf/cm²) |
| Material | Sleeve/Gland: FCD450 Bolts/Nuts: SS400, etc. Rubber: SBR, etc. |
| Coating | Internal/External Surfaces: Liquid epoxy resin coating for water supply Bolts/Nuts: Hot-dip galvanized *Other coating options are also available upon request.* |
| Applications |
Applications
Required performance
Pipe end
Operating pressure
|
